Accountant Forums


Reply
Thread Tools

Metrologic Barcode Scanner

 
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-09-2006, 10:23 PM
RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
to have someone send me a file on how to set-up my opos for debit cards,
worked great and thank you. i dont want to burn up another incident to get
this down load? any help?
--
John SS
 
Reply With Quote
 
 
 
 
Rob
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 03:46 AM
Plug you scanner into your computer and test the scanner by opening Notepad
and scan anything that has a barcode. It should enter the number and go to
the next line. If it does you have successfully setup your scanner.

Rob

"John SS" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> RMS POS, trying to set up scanner model MS9520 yesterday i burned an
> incident
> to have someone send me a file on how to set-up my opos for debit cards,
> worked great and thank you. i dont want to burn up another incident to get
> this down load? any help?
> --
> John SS



 
Reply With Quote
 
 
 
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 01:36 PM
right now the scanner lights up, scans one item, beeps adn locks up, does not
enter an item into to register
--
John SS


"Rob" wrote:

> Plug you scanner into your computer and test the scanner by opening Notepad
> and scan anything that has a barcode. It should enter the number and go to
> the next line. If it does you have successfully setup your scanner.
>
> Rob
>
> "John SS" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
> > incident
> > to have someone send me a file on how to set-up my opos for debit cards,
> > worked great and thank you. i dont want to burn up another incident to get
> > this down load? any help?
> > --
> > John SS

>
>
>

 
Reply With Quote
 
Rob
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 03:46 PM
Have you tried scanning any of the configuration barcodes in the
Configuration Guide? If so, try scanning the Factory Default barcode. Then
test scan any barcode into NOTEPAD.

Rob

"John SS" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> right now the scanner lights up, scans one item, beeps adn locks up, does
> not
> enter an item into to register
> --
> John SS
>
>
> "Rob" wrote:
>
>> Plug you scanner into your computer and test the scanner by opening
>> Notepad
>> and scan anything that has a barcode. It should enter the number and go
>> to
>> the next line. If it does you have successfully setup your scanner.
>>
>> Rob
>>
>> "John SS" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
>> > incident
>> > to have someone send me a file on how to set-up my opos for debit
>> > cards,
>> > worked great and thank you. i dont want to burn up another incident to
>> > get
>> > this down load? any help?
>> > --
>> > John SS

>>
>>
>>



 
Reply With Quote
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 05:18 PM
I'll try this weekend again and get back to you.
--
John SS


"Rob" wrote:

> Have you tried scanning any of the configuration barcodes in the
> Configuration Guide? If so, try scanning the Factory Default barcode. Then
> test scan any barcode into NOTEPAD.
>
> Rob
>
> "John SS" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > right now the scanner lights up, scans one item, beeps adn locks up, does
> > not
> > enter an item into to register
> > --
> > John SS
> >
> >
> > "Rob" wrote:
> >
> >> Plug you scanner into your computer and test the scanner by opening
> >> Notepad
> >> and scan anything that has a barcode. It should enter the number and go
> >> to
> >> the next line. If it does you have successfully setup your scanner.
> >>
> >> Rob
> >>
> >> "John SS" <(E-Mail Removed)> wrote in message
> >> news:(E-Mail Removed)...
> >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
> >> > incident
> >> > to have someone send me a file on how to set-up my opos for debit
> >> > cards,
> >> > worked great and thank you. i dont want to burn up another incident to
> >> > get
> >> > this down load? any help?
> >> > --
> >> > John SS
> >>
> >>
> >>

>
>
>

 
Reply With Quote
 
Jack T
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 05:58 PM
I've got the Metrologic 9540 USB version with MX009, and have problems too,
seems it locks up POS. Gave up so far and put back in box. I am told the
keyboard wedge is the way to go....

"John SS" wrote:

> I'll try this weekend again and get back to you.
> --
> John SS
>
>
> "Rob" wrote:
>
> > Have you tried scanning any of the configuration barcodes in the
> > Configuration Guide? If so, try scanning the Factory Default barcode. Then
> > test scan any barcode into NOTEPAD.
> >
> > Rob
> >
> > "John SS" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > right now the scanner lights up, scans one item, beeps adn locks up, does
> > > not
> > > enter an item into to register
> > > --
> > > John SS
> > >
> > >
> > > "Rob" wrote:
> > >
> > >> Plug you scanner into your computer and test the scanner by opening
> > >> Notepad
> > >> and scan anything that has a barcode. It should enter the number and go
> > >> to
> > >> the next line. If it does you have successfully setup your scanner.
> > >>
> > >> Rob
> > >>
> > >> "John SS" <(E-Mail Removed)> wrote in message
> > >> news:(E-Mail Removed)...
> > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
> > >> > incident
> > >> > to have someone send me a file on how to set-up my opos for debit
> > >> > cards,
> > >> > worked great and thank you. i dont want to burn up another incident to
> > >> > get
> > >> > this down load? any help?
> > >> > --
> > >> > John SS
> > >>
> > >>
> > >>

> >
> >
> >

 
Reply With Quote
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 06:16 PM
keyboard wedge?
--
John SS


"Jack T" wrote:

> I've got the Metrologic 9540 USB version with MX009, and have problems too,
> seems it locks up POS. Gave up so far and put back in box. I am told the
> keyboard wedge is the way to go....
>
> "John SS" wrote:
>
> > I'll try this weekend again and get back to you.
> > --
> > John SS
> >
> >
> > "Rob" wrote:
> >
> > > Have you tried scanning any of the configuration barcodes in the
> > > Configuration Guide? If so, try scanning the Factory Default barcode. Then
> > > test scan any barcode into NOTEPAD.
> > >
> > > Rob
> > >
> > > "John SS" <(E-Mail Removed)> wrote in message
> > > news:(E-Mail Removed)...
> > > > right now the scanner lights up, scans one item, beeps adn locks up, does
> > > > not
> > > > enter an item into to register
> > > > --
> > > > John SS
> > > >
> > > >
> > > > "Rob" wrote:
> > > >
> > > >> Plug you scanner into your computer and test the scanner by opening
> > > >> Notepad
> > > >> and scan anything that has a barcode. It should enter the number and go
> > > >> to
> > > >> the next line. If it does you have successfully setup your scanner.
> > > >>
> > > >> Rob
> > > >>
> > > >> "John SS" <(E-Mail Removed)> wrote in message
> > > >> news:(E-Mail Removed)...
> > > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
> > > >> > incident
> > > >> > to have someone send me a file on how to set-up my opos for debit
> > > >> > cards,
> > > >> > worked great and thank you. i dont want to burn up another incident to
> > > >> > get
> > > >> > this down load? any help?
> > > >> > --
> > > >> > John SS
> > > >>
> > > >>
> > > >>
> > >
> > >
> > >

 
Reply With Quote
 
Glenn Adams [MVP - Retail Mgmt]
Guest
Posts: n/a
Thanked:
 
      03-10-2006, 08:13 PM
What type of connection does your scanner use? USB, Keyboard, Serial?

The USB versions are plug and play.

The Keyboard Wedge version is Plug and play AS LONG AS you have a PS/2
keyboard plugged into the Wedge part of the cable. If you try to use a KB
Wedge scanner and a USB keyboard you will get very similar results to what
you have posted...

With the USB or KB Wedge versions, you should NOT configure anything for the
scanner in the register properties in RMS.

I've never used the serial versin (RS-232), but I believe that you have to
set that one up with OPOS drivers and configure it in RMS...

--
--
Glenn Adams
Tiber Creek Consulting
http://www.tibercreek.com
(E-Mail Removed)
----------------------------------------------
Please DO NOT respond to me directly but post all responses here in the
newsgroup so that all can share the information

"John SS" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> right now the scanner lights up, scans one item, beeps adn locks up, does
> not
> enter an item into to register
> --
> John SS
>
>
> "Rob" wrote:
>
>> Plug you scanner into your computer and test the scanner by opening
>> Notepad
>> and scan anything that has a barcode. It should enter the number and go
>> to
>> the next line. If it does you have successfully setup your scanner.
>>
>> Rob
>>
>> "John SS" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
>> > incident
>> > to have someone send me a file on how to set-up my opos for debit
>> > cards,
>> > worked great and thank you. i dont want to burn up another incident to
>> > get
>> > this down load? any help?
>> > --
>> > John SS

>>
>>
>>



 
Reply With Quote
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-21-2006, 02:19 PM
I quit. cannot get scanner to work. Tried resettign to factory defaults, I
think the opos is set correctly. now when I log in my computer sayes acces
denied. what does microsoft recommend as plug and play scanner, and who would
you buy from?
--
John SS


"John SS" wrote:

> RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
> to have someone send me a file on how to set-up my opos for debit cards,
> worked great and thank you. i dont want to burn up another incident to get
> this down load? any help?
> --
> John SS

 
Reply With Quote
 
John SS
Guest
Posts: n/a
Thanked:
 
      03-21-2006, 02:33 PM
P.S. - i also lost my pinpad for debit cards at the same time
--
John SS


"John SS" wrote:

> I quit. cannot get scanner to work. Tried resettign to factory defaults, I
> think the opos is set correctly. now when I log in my computer sayes acces
> denied. what does microsoft recommend as plug and play scanner, and who would
> you buy from?
> --
> John SS
>
>
> "John SS" wrote:
>
> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
> > to have someone send me a file on how to set-up my opos for debit cards,
> > worked great and thank you. i dont want to burn up another incident to get
> > this down load? any help?
> > --
> > John SS

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Metrologic MS2320 scale/scanner Andy Miller - Teknor, Inc. Microsoft Point Of Sale 3 12-31-2009 08:42 PM
metrologic scale scanner ms2020 or ms 2030 Daniel@Chicagocashregister Microsoft Point Of Sale 0 08-06-2008 07:59 PM
Metrologic Scanner Vince Microsoft Point Of Sale 2 07-23-2008 02:15 PM
Configure Metrologic Scanner MS9520 for POS 2.0 Nick Microsoft Point Of Sale 2 04-30-2007 02:40 AM
Metrologic 9540 USB OPOS scanner Microsoft Point Of Sale 12 08-16-2004 05:08 PM


All times are GMT. The time now is 04:11 AM.
Posts in this forum do not constitute the advice of AccountantForums.com or its members. Financial advice should always be taken from qualified advisors before committing to a financial decision.