Metrologic Barcode Scanner

Discussion in 'Microsoft Point Of Sale' started by John SS, Mar 9, 2006.

  1. John SS

    John SS Guest

    RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
    to have someone send me a file on how to set-up my opos for debit cards,
    worked great and thank you. i dont want to burn up another incident to get
    this down load? any help?
    --
    John SS
     
    John SS, Mar 9, 2006
    #1
    1. Advertisements

  2. John SS

    Rob Guest

    Plug you scanner into your computer and test the scanner by opening Notepad
    and scan anything that has a barcode. It should enter the number and go to
    the next line. If it does you have successfully setup your scanner.

    Rob

    "John SS" <> wrote in message
    news:...
    > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    > incident
    > to have someone send me a file on how to set-up my opos for debit cards,
    > worked great and thank you. i dont want to burn up another incident to get
    > this down load? any help?
    > --
    > John SS
     
    Rob, Mar 10, 2006
    #2
    1. Advertisements

  3. John SS

    John SS Guest

    right now the scanner lights up, scans one item, beeps adn locks up, does not
    enter an item into to register
    --
    John SS


    "Rob" wrote:

    > Plug you scanner into your computer and test the scanner by opening Notepad
    > and scan anything that has a barcode. It should enter the number and go to
    > the next line. If it does you have successfully setup your scanner.
    >
    > Rob
    >
    > "John SS" <> wrote in message
    > news:...
    > > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    > > incident
    > > to have someone send me a file on how to set-up my opos for debit cards,
    > > worked great and thank you. i dont want to burn up another incident to get
    > > this down load? any help?
    > > --
    > > John SS

    >
    >
    >
     
    John SS, Mar 10, 2006
    #3
  4. John SS

    Rob Guest

    Have you tried scanning any of the configuration barcodes in the
    Configuration Guide? If so, try scanning the Factory Default barcode. Then
    test scan any barcode into NOTEPAD.

    Rob

    "John SS" <> wrote in message
    news:...
    > right now the scanner lights up, scans one item, beeps adn locks up, does
    > not
    > enter an item into to register
    > --
    > John SS
    >
    >
    > "Rob" wrote:
    >
    >> Plug you scanner into your computer and test the scanner by opening
    >> Notepad
    >> and scan anything that has a barcode. It should enter the number and go
    >> to
    >> the next line. If it does you have successfully setup your scanner.
    >>
    >> Rob
    >>
    >> "John SS" <> wrote in message
    >> news:...
    >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    >> > incident
    >> > to have someone send me a file on how to set-up my opos for debit
    >> > cards,
    >> > worked great and thank you. i dont want to burn up another incident to
    >> > get
    >> > this down load? any help?
    >> > --
    >> > John SS

    >>
    >>
    >>
     
    Rob, Mar 10, 2006
    #4
  5. John SS

    John SS Guest

    I'll try this weekend again and get back to you.
    --
    John SS


    "Rob" wrote:

    > Have you tried scanning any of the configuration barcodes in the
    > Configuration Guide? If so, try scanning the Factory Default barcode. Then
    > test scan any barcode into NOTEPAD.
    >
    > Rob
    >
    > "John SS" <> wrote in message
    > news:...
    > > right now the scanner lights up, scans one item, beeps adn locks up, does
    > > not
    > > enter an item into to register
    > > --
    > > John SS
    > >
    > >
    > > "Rob" wrote:
    > >
    > >> Plug you scanner into your computer and test the scanner by opening
    > >> Notepad
    > >> and scan anything that has a barcode. It should enter the number and go
    > >> to
    > >> the next line. If it does you have successfully setup your scanner.
    > >>
    > >> Rob
    > >>
    > >> "John SS" <> wrote in message
    > >> news:...
    > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    > >> > incident
    > >> > to have someone send me a file on how to set-up my opos for debit
    > >> > cards,
    > >> > worked great and thank you. i dont want to burn up another incident to
    > >> > get
    > >> > this down load? any help?
    > >> > --
    > >> > John SS
    > >>
    > >>
    > >>

    >
    >
    >
     
    John SS, Mar 10, 2006
    #5
  6. John SS

    Jack T Guest

    I've got the Metrologic 9540 USB version with MX009, and have problems too,
    seems it locks up POS. Gave up so far and put back in box. I am told the
    keyboard wedge is the way to go....

    "John SS" wrote:

    > I'll try this weekend again and get back to you.
    > --
    > John SS
    >
    >
    > "Rob" wrote:
    >
    > > Have you tried scanning any of the configuration barcodes in the
    > > Configuration Guide? If so, try scanning the Factory Default barcode. Then
    > > test scan any barcode into NOTEPAD.
    > >
    > > Rob
    > >
    > > "John SS" <> wrote in message
    > > news:...
    > > > right now the scanner lights up, scans one item, beeps adn locks up, does
    > > > not
    > > > enter an item into to register
    > > > --
    > > > John SS
    > > >
    > > >
    > > > "Rob" wrote:
    > > >
    > > >> Plug you scanner into your computer and test the scanner by opening
    > > >> Notepad
    > > >> and scan anything that has a barcode. It should enter the number and go
    > > >> to
    > > >> the next line. If it does you have successfully setup your scanner.
    > > >>
    > > >> Rob
    > > >>
    > > >> "John SS" <> wrote in message
    > > >> news:...
    > > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    > > >> > incident
    > > >> > to have someone send me a file on how to set-up my opos for debit
    > > >> > cards,
    > > >> > worked great and thank you. i dont want to burn up another incident to
    > > >> > get
    > > >> > this down load? any help?
    > > >> > --
    > > >> > John SS
    > > >>
    > > >>
    > > >>

    > >
    > >
    > >
     
    Jack T, Mar 10, 2006
    #6
  7. John SS

    John SS Guest

    keyboard wedge?
    --
    John SS


    "Jack T" wrote:

    > I've got the Metrologic 9540 USB version with MX009, and have problems too,
    > seems it locks up POS. Gave up so far and put back in box. I am told the
    > keyboard wedge is the way to go....
    >
    > "John SS" wrote:
    >
    > > I'll try this weekend again and get back to you.
    > > --
    > > John SS
    > >
    > >
    > > "Rob" wrote:
    > >
    > > > Have you tried scanning any of the configuration barcodes in the
    > > > Configuration Guide? If so, try scanning the Factory Default barcode. Then
    > > > test scan any barcode into NOTEPAD.
    > > >
    > > > Rob
    > > >
    > > > "John SS" <> wrote in message
    > > > news:...
    > > > > right now the scanner lights up, scans one item, beeps adn locks up, does
    > > > > not
    > > > > enter an item into to register
    > > > > --
    > > > > John SS
    > > > >
    > > > >
    > > > > "Rob" wrote:
    > > > >
    > > > >> Plug you scanner into your computer and test the scanner by opening
    > > > >> Notepad
    > > > >> and scan anything that has a barcode. It should enter the number and go
    > > > >> to
    > > > >> the next line. If it does you have successfully setup your scanner.
    > > > >>
    > > > >> Rob
    > > > >>
    > > > >> "John SS" <> wrote in message
    > > > >> news:...
    > > > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    > > > >> > incident
    > > > >> > to have someone send me a file on how to set-up my opos for debit
    > > > >> > cards,
    > > > >> > worked great and thank you. i dont want to burn up another incident to
    > > > >> > get
    > > > >> > this down load? any help?
    > > > >> > --
    > > > >> > John SS
    > > > >>
    > > > >>
    > > > >>
    > > >
    > > >
    > > >
     
    John SS, Mar 10, 2006
    #7
  8. What type of connection does your scanner use? USB, Keyboard, Serial?

    The USB versions are plug and play.

    The Keyboard Wedge version is Plug and play AS LONG AS you have a PS/2
    keyboard plugged into the Wedge part of the cable. If you try to use a KB
    Wedge scanner and a USB keyboard you will get very similar results to what
    you have posted...

    With the USB or KB Wedge versions, you should NOT configure anything for the
    scanner in the register properties in RMS.

    I've never used the serial versin (RS-232), but I believe that you have to
    set that one up with OPOS drivers and configure it in RMS...

    --
    --
    Glenn Adams
    Tiber Creek Consulting
    http://www.tibercreek.com

    ----------------------------------------------
    Please DO NOT respond to me directly but post all responses here in the
    newsgroup so that all can share the information

    "John SS" <> wrote in message
    news:...
    > right now the scanner lights up, scans one item, beeps adn locks up, does
    > not
    > enter an item into to register
    > --
    > John SS
    >
    >
    > "Rob" wrote:
    >
    >> Plug you scanner into your computer and test the scanner by opening
    >> Notepad
    >> and scan anything that has a barcode. It should enter the number and go
    >> to
    >> the next line. If it does you have successfully setup your scanner.
    >>
    >> Rob
    >>
    >> "John SS" <> wrote in message
    >> news:...
    >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned an
    >> > incident
    >> > to have someone send me a file on how to set-up my opos for debit
    >> > cards,
    >> > worked great and thank you. i dont want to burn up another incident to
    >> > get
    >> > this down load? any help?
    >> > --
    >> > John SS

    >>
    >>
    >>
     
    Glenn Adams [MVP - Retail Mgmt], Mar 10, 2006
    #8
  9. John SS

    John SS Guest

    I quit. cannot get scanner to work. Tried resettign to factory defaults, I
    think the opos is set correctly. now when I log in my computer sayes acces
    denied. what does microsoft recommend as plug and play scanner, and who would
    you buy from?
    --
    John SS


    "John SS" wrote:

    > RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
    > to have someone send me a file on how to set-up my opos for debit cards,
    > worked great and thank you. i dont want to burn up another incident to get
    > this down load? any help?
    > --
    > John SS
     
    John SS, Mar 21, 2006
    #9
  10. John SS

    John SS Guest

    P.S. - i also lost my pinpad for debit cards at the same time
    --
    John SS


    "John SS" wrote:

    > I quit. cannot get scanner to work. Tried resettign to factory defaults, I
    > think the opos is set correctly. now when I log in my computer sayes acces
    > denied. what does microsoft recommend as plug and play scanner, and who would
    > you buy from?
    > --
    > John SS
    >
    >
    > "John SS" wrote:
    >
    > > RMS POS, trying to set up scanner model MS9520 yesterday i burned an incident
    > > to have someone send me a file on how to set-up my opos for debit cards,
    > > worked great and thank you. i dont want to burn up another incident to get
    > > this down load? any help?
    > > --
    > > John SS
     
    John SS, Mar 21, 2006
    #10
  11. John SS

    rick Guest

    You can get the USB version that acts like KBW that is the easiest way to go
    OPOS is a Pain.

    "Jack T" <> wrote in message
    news:...
    > I've got the Metrologic 9540 USB version with MX009, and have problems
    > too,
    > seems it locks up POS. Gave up so far and put back in box. I am told the
    > keyboard wedge is the way to go....
    >
    > "John SS" wrote:
    >
    >> I'll try this weekend again and get back to you.
    >> --
    >> John SS
    >>
    >>
    >> "Rob" wrote:
    >>
    >> > Have you tried scanning any of the configuration barcodes in the
    >> > Configuration Guide? If so, try scanning the Factory Default barcode.
    >> > Then
    >> > test scan any barcode into NOTEPAD.
    >> >
    >> > Rob
    >> >
    >> > "John SS" <> wrote in message
    >> > news:...
    >> > > right now the scanner lights up, scans one item, beeps adn locks up,
    >> > > does
    >> > > not
    >> > > enter an item into to register
    >> > > --
    >> > > John SS
    >> > >
    >> > >
    >> > > "Rob" wrote:
    >> > >
    >> > >> Plug you scanner into your computer and test the scanner by opening
    >> > >> Notepad
    >> > >> and scan anything that has a barcode. It should enter the number and
    >> > >> go
    >> > >> to
    >> > >> the next line. If it does you have successfully setup your scanner.
    >> > >>
    >> > >> Rob
    >> > >>
    >> > >> "John SS" <> wrote in message
    >> > >> news:...
    >> > >> > RMS POS, trying to set up scanner model MS9520 yesterday i burned
    >> > >> > an
    >> > >> > incident
    >> > >> > to have someone send me a file on how to set-up my opos for debit
    >> > >> > cards,
    >> > >> > worked great and thank you. i dont want to burn up another
    >> > >> > incident to
    >> > >> > get
    >> > >> > this down load? any help?
    >> > >> > --
    >> > >> > John SS
    >> > >>
    >> > >>
    >> > >>
    >> >
    >> >
    >> >
     
    rick, Mar 21, 2006
    #11
    1. Advertisements

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Guest

    Metrologic 9540 USB OPOS scanner

    Guest, Aug 5, 2004, in forum: Microsoft Point Of Sale
    Replies:
    12
    Views:
    1,693
  2. Nick

    Configure Metrologic Scanner MS9520 for POS 2.0

    Nick, Apr 29, 2007, in forum: Microsoft Point Of Sale
    Replies:
    2
    Views:
    1,348
  3. Vince

    Metrologic Scanner

    Vince, Jul 20, 2008, in forum: Microsoft Point Of Sale
    Replies:
    2
    Views:
    569
    Sparky06413
    Jul 23, 2008
  4. Daniel@Chicagocashregister

    metrologic scale scanner ms2020 or ms 2030

    Daniel@Chicagocashregister, Aug 6, 2008, in forum: Microsoft Point Of Sale
    Replies:
    0
    Views:
    335
    Daniel@Chicagocashregister
    Aug 6, 2008
  5. Andy Miller - Teknor, Inc.

    Metrologic MS2320 scale/scanner

    Andy Miller - Teknor, Inc., Apr 9, 2009, in forum: Microsoft Point Of Sale
    Replies:
    3
    Views:
    1,265
Loading...

Share This Page