Short Term Technical Analysis for Majors (08:10 GMT)

Joined
Aug 24, 2010
Messages
70
Reaction score
0
EUR/USD

Yesterday’s failure to sustain break below trendline support at 1.2672, with 1.2658 low reached, triggered a correction higher to leave a lower top at 1.2762, ahead of fresh weakness. Market currently attempting through 1.2658 and clear break here to open 1.2625/1.2586, with extension to 1.2522 not ruled out. To improve immediate bear tone and delay weakness, regain of 1.2762/75, is required.

Res: 1.2762, 1.2775, 1.2840, 1.2875
Sup: 1.2658, 1.2625, 1.2586, 1.2522



GBP/USD

Recovery off 1.5295, 07 Sep low, cleared 1.5490, an hourly trendline resistance, drawn off 1.5596, extending gains to 1.5532 yesterday, ahead of reversal. Fresh weakness is now underway, looking for possible retest of 1.5295, while 1.5532 caps. However, underlying bear trend remains intact as long as 1.5575/1.5617 zone holds.


Res: 1.5476, 1.5492, 1.5532, 1.5543
Sup: 1.5357, 1.5344, 1.5336, 1.5325



USD/JPY

Yesterday’s break below the recent 83.66/51 floor, reached 83.33, before bouncing to mark a likely lower top at 84.05. Potential break below 83.33 will open next target at 82.98. Upside, break above 84.05 would delay, risking 84.28/47 first.

Res: 84.05, 84.28, 84.47, 84.82
Sup: 83.51, 83.33, 82.98, 82.30



USD/CHF

Attempts to break higher, following bounce off 1.0059, yesterday’s low, with market currently breaking through 1.0138/45, previous highs. Sustained break here is needed to resume recovery and expose 1.0237/61, 03 Sep/31 Aug highs. Otherwise, fresh weakness and retest of 1.0059 would be the likely scenario.

Res: 1.0186, 1.0237, 1.0261, 1.0275
Sup: 1.0099, 1.0059, 1.0027, 1.0000
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

Forum statistics

Threads
11,629
Messages
27,572
Members
21,370
Latest member
BoltonPlumbing

Latest Threads

Top