HQ Client and invalid store id\connection issue


P

Pete

Have client with four stores. Running RMS V 2.0.
New store is number 4. Have been able to establish connection to HQ but get
this message on the log:
HQ message contains an invalid store\id connection passowrd.
Although the message is quite clear. Where exactly should we be making the
adjustments?
Thank you veruy much.
 
Ad

Advertisements

G

Glenn Adams [MVP - Retail Mgmt]

2 places:
In HQ Manager, Admin/Stores
Open properties for Store 4 ( I believe you need to be in Maintenence
Mode to do this)
Go to connection Schedule Tab - near the bottom of the tab you can enter
a password - this is unique to each store.

In HQ Client, File/Configuration, HQ Server Tab - enter the same
password you used at HQ Manager...

Glenn Adams
Tiber Creek Consulting
http://www.tibercreek.com
(e-mail address removed)
 
P

Pete

This procedure seems to be specifically if we want to assign a password to
scure the communication with the HQ server. Not sure it applies to what were
are looking for however.
In either case we have matched the database user name and password from the
SO to the HQ. We no longer get the message invalid Store ID / Connection
Password but rather this:
<<ExecuteCommand>> Error -2147467259: [DBNETLIB][ConnectionRead [Wr
also get
<<OpenRsRead>> Error -2147467259: Connection failure.

Any ideas on this!
Currently setup up to connect via internet. HQ has Static Public IP and
router has been configured to HQ Server via port 34777, which has been
matched at the SO.

Thank you very much!
 
Ad

Advertisements

G

Glenn Adams [MVP - Retail Mgmt]

The answer I gave before was the solution to the Invalid store number or
password error.

You don't have to have the same UserID/Password at the store as at HQ.
I suspect that in changing it you have mis-configured something -
probably HQ Client, but I can't tell from the truncated error message in
your post.

Check HQ Client, File/Configuration, Database Tab. Try the test
connection button and verify that you are connecting. Also, remember
that the HQ Client should be connecting to a Store DB not an HQ DB.




This procedure seems to be specifically if we want to assign a password to
scure the communication with the HQ server. Not sure it applies to what were
are looking for however.
In either case we have matched the database user name and password from the
SO to the HQ. We no longer get the message invalid Store ID / Connection
Password but rather this:
<<ExecuteCommand>> Error -2147467259: [DBNETLIB][ConnectionRead [Wr
also get
<<OpenRsRead>> Error -2147467259: Connection failure.

Any ideas on this!
Currently setup up to connect via internet. HQ has Static Public IP and
router has been configured to HQ Server via port 34777, which has been
matched at the SO.

Thank you very much!
Glenn Adams said:
2 places:
In HQ Manager, Admin/Stores
Open properties for Store 4 ( I believe you need to be in Maintenence
Mode to do this)
Go to connection Schedule Tab - near the bottom of the tab you can enter
a password - this is unique to each store.

In HQ Client, File/Configuration, HQ Server Tab - enter the same
password you used at HQ Manager...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top