Urgent urgent urgent


A

Anna

Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it is
showing me the attached error. Is there different kind of license to run 1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets assume
also we sold quantity 6 of the item Z in store A, in this case quantity in
store A will be -1.Can I deduct the quantity 1 from B stock?? within a
minute ?



Please help me in that
 
T

Tom Platinum systems ltd

Normally happens when the evaluation period has ended on the database if you
have a dongle put it in and it should be fine if its already in check that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin
 
Ad

Advertisements

A

Anna

No, everything is fine but when i wanted to connect 2 POS with one database i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database if you
have a dongle put it in and it should be fine if its already in check that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin

Anna said:
Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it is
showing me the attached error. Is there different kind of license to run 1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets assume
also we sold quantity 6 of the item Z in store A, in this case quantity in
store A will be -1.Can I deduct the quantity 1 from B stock?? within a
minute ?



Please help me in that
 
J

Jeff

You have 2 machines trying to access the same database as Register 1.
Change one of them to a different register number. SO Admin | File |
Connect | put in your password | File | Configuration | Register tab

You also need a 2 lane license for 2 machines at the same time. Help |
About



No, everything is fine but when i wanted to connect 2 POS with one database
i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database if
you
have a dongle put it in and it should be fine if its already in check that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin

Anna said:
Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it
is
showing me the attached error. Is there different kind of license to run
1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from
store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity
in
store A will be -1.Can I deduct the quantity 1 from B stock?? within a
minute ?



Please help me in that
 
A

Anna

Thank you very much Jeff

Jeff said:
You have 2 machines trying to access the same database as Register 1.
Change one of them to a different register number. SO Admin | File |
Connect | put in your password | File | Configuration | Register tab

You also need a 2 lane license for 2 machines at the same time. Help |
About

--
*
Get Secure! - www.microsoft.com/security

You must be using Outlook Express or some other type of newsgroup reader to
see and download the file attachment. If you are not using a reader, follow
the link below to setup Outlook Express. Click on "Open with newsreader"
under the MS Retail Management System on the right.

http://tinyurl.com/75bgz

**********

No, everything is fine but when i wanted to connect 2 POS with one database
i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database if
you
have a dongle put it in and it should be fine if its already in check that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin

Anna said:
Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it
is
showing me the attached error. Is there different kind of license to run
1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from
store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity
in
store A will be -1.Can I deduct the quantity 1 from B stock?? within a
minute ?



Please help me in that
 
A

Anna

I get
Not found Error 206: the register is not in the database

Hmmm,
actually no time to buy 2 lane license at least in this period of short time
because we will need to use the system for Formulla 1 event which will start
after 4 days.

what about the other solution?
Could worksheet style 330 to be done automatically and transfer inventory
for the store which has quantity 0 automatically ?

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity in
store A will be -1.Can I deduct the quantity 1 from B stock?? within minute ?


Jeff said:
You have 2 machines trying to access the same database as Register 1.
Change one of them to a different register number. SO Admin | File |
Connect | put in your password | File | Configuration | Register tab

You also need a 2 lane license for 2 machines at the same time. Help |
About

--
*
Get Secure! - www.microsoft.com/security

You must be using Outlook Express or some other type of newsgroup reader to
see and download the file attachment. If you are not using a reader, follow
the link below to setup Outlook Express. Click on "Open with newsreader"
under the MS Retail Management System on the right.

http://tinyurl.com/75bgz

**********

No, everything is fine but when i wanted to connect 2 POS with one database
i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database if
you
have a dongle put it in and it should be fine if its already in check that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin

Anna said:
Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it
is
showing me the attached error. Is there different kind of license to run
1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from
store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity
in
store A will be -1.Can I deduct the quantity 1 from B stock?? within a
minute ?



Please help me in that
 
J

Jeff

Anna,

Add the new register to the database. SO Manager | Database | Registers |
Register List | Add or Copy | type in the new register number you created.

Try contacting your reseller and see if you can borrow their 3 user dongle
they received free from MS.

Not exactly sure what you are trying to do, but unless the stores are
connecting every minute, the answer is no.



I get
Not found Error 206: the register is not in the database

Hmmm,
actually no time to buy 2 lane license at least in this period of short time
because we will need to use the system for Formulla 1 event which will start
after 4 days.

what about the other solution?
Could worksheet style 330 to be done automatically and transfer inventory
for the store which has quantity 0 automatically ?

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity in
store A will be -1.Can I deduct the quantity 1 from B stock?? within minute
?


Jeff said:
You have 2 machines trying to access the same database as Register 1.
Change one of them to a different register number. SO Admin | File |
Connect | put in your password | File | Configuration | Register tab

You also need a 2 lane license for 2 machines at the same time. Help |
About



No, everything is fine but when i wanted to connect 2 POS with one
database
i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database if
you
have a dongle put it in and it should be fine if its already in check
that
its installed correctly and make sure you ragister has different numbers
which is set up in so admin

Anna said:
Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain it
is
showing me the attached error. Is there different kind of license to
run
1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity from
store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of
Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case
quantity
in
store A will be -1.Can I deduct the quantity 1 from B stock?? within
a
minute ?



Please help me in that
 
Ad

Advertisements

G

Glenn Adams [MVP - Retail Mgmt]

Also, contact your reseller about just geting a 2 lane dongle - they can be
overnighted, no problem getting it done in 4 days...

--


Jeff said:
Anna,

Add the new register to the database. SO Manager | Database | Registers |
Register List | Add or Copy | type in the new register number you created.

Try contacting your reseller and see if you can borrow their 3 user dongle
they received free from MS.

Not exactly sure what you are trying to do, but unless the stores are
connecting every minute, the answer is no.



I get
Not found Error 206: the register is not in the database

Hmmm,
actually no time to buy 2 lane license at least in this period of short
time
because we will need to use the system for Formulla 1 event which will
start
after 4 days.

what about the other solution?
Could worksheet style 330 to be done automatically and transfer inventory
for the store which has quantity 0 automatically ?

For ex.

We have 2 POS using same warehouse and lets assume we have quantity of Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case quantity in
store A will be -1.Can I deduct the quantity 1 from B stock?? within
minute
?


Jeff said:
You have 2 machines trying to access the same database as Register 1.
Change one of them to a different register number. SO Admin | File |
Connect | put in your password | File | Configuration | Register tab

You also need a 2 lane license for 2 machines at the same time. Help |
About



No, everything is fine but when i wanted to connect 2 POS with one
database
i
see this error.
SOMEBODY HELP ME PLZ

Tom Platinum systems ltd said:
Normally happens when the evaluation period has ended on the database
if
you
have a dongle put it in and it should be fine if its already in check
that
its installed correctly and make sure you ragister has different
numbers
which is set up in so admin

:

Please Can you help me in that as soon as possible?


When I try to connect 2 machines with single database on our domain
it
is
showing me the attached error. Is there different kind of license to
run
1
database on 2 machines-POS.


http://up4.w6w.net/upload/05-03-2006/w6w_2006030517123168130cdc.JPG

Or is there a way to update quantity from hq or transfer quantity
from
store
A to store B? We want this to be done within 1 minute at least.

I will try to explain you the problem in details:

For ex.

We have 2 POS using same warehouse and lets assume we have quantity
of
Z
item 10 and we will divided it 5 in store A and 5 in store B and lets
assume
also we sold quantity 6 of the item Z in store A, in this case
quantity
in
store A will be -1.Can I deduct the quantity 1 from B stock?? within
a
minute ?



Please help me in that
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top